A Watson-Marlow 102 pump-head is fitted on a compact plastic box giving a very small footprint at a competitive price.

A range of pump speeds are available with 1rpm & 4rpm supplied as standard.

The pumps use tubing with a wall thickness of 1.6mm and can accommodate tubing with bore sizes of:- 0.5mm, 0.8mm, 1.6mm, 3.2mm & 4.8mm. With this range of tubing & motor speeds from 0.67 to 20 rpm, flow rates between 0.014 & 32.6 ml/min can be achieved.

No tube connectors are required and a continuous length of tubing can be run from the source to delivery point.

Long tube life and precise flow rates are assured by the sprung roller design.

The synchronous motors (no brushes) can be pulsed precisely to give very accurate control & long motor life.

Standard voltages for the motors are 240V or 110V 50/60Hz

Size 120mm x 80mm x 100mm high